Friday, August 8, 2014

Porcupine ornament tutorial kid's craft



Summer is a good time to start crafting ornaments.  You can hang this little porcupine on the tree or eliminate the cord hanger and set him just about anywhere. Very few and inexpensive supplies make this little guy a great group project for churches, girl scouts and more.  Up next... Turtle of course


Porcupine ornament

You will need:

6 Inches gold wire (optional)

3-inch foam ball (76mm) You can use white but I chose the green ones because I had them on hand

6 ml wiggle eyes

large brown chenille stems

Twigs

Wire cutters

Brown pony bead

Brown fun foam

Scissors

Waxed paper to cover work surface while painting

Tacky craft glue

Brown acrylic paint

Small paintbrush

Ruler

Scrap of tan felt

Rubber band

Serrated steak knife

1.     Using the serrated knife carefully cut the foam ball in half.  Rub them together to sand off any rough places.


2.     Place the foam ball half on waxed paper and brush some brown acrylic paint over the entire surface and let dry.


3.     Download the foot pattern and trace onto lightweight cardboard.  Use it to cut out four feet from the fun foam.



4.     Bend a large chenille stem around the arch of the foam half, leaving about an inch or so overlap.  Cut it to fit. (See photo)  Repeat with a second piece of chenille stem so that you have two molded to the foam side by side.  Dab a bit of glue on the two overlapped ends and thread on a pony bead. (Nose) Add a generous amount of glue on the curve of the foam half and attach the two chenille stem pieces.  Secure with a rubber band till the glue sets. (See photo)


5.     Cut several one-inch pieces of tiny twigs with wire cutters.  Add a dot of glue on the ends and insert randomly in the foam back. (quills) Let dry. 




6.     Turn over and work on the bottom. Trace around the foam ball onto a piece of scrap tan felt and cut out.  Using the tacky glue attach fun foam feet around.  Add some more glue and attach a loop of gold cord (optional) Add a generous amount of glue and attach the tan felt circle to cover.  (See photo)  Let dry.





7.     Add wiggle eyes to the front above the nose with some tacky glue.



Note:  Use only tacky glue and brush on acrylic paint.  Some glues and spray paints will eat through the foam.  




9 comments:

  1. So cute! The badger was cute, but I like this porcupine even more. How you use the resources always amazes me!

    ReplyDelete
  2. So lovely! I loooove it! Amazing creation! Thanks for sharing tutorial!
    Hope you have a wonderful day!
    Hugs from Portugal,
    Ana Love Craft
    www.lovecraft2012.blogspot.com

    ReplyDelete
  3. Aww so sweet, love this idea :)

    Thanks for sharing at the #weekendbloghop :)

    ReplyDelete
  4. This is so cute! Glad I found this on Serenity You! Pinning it.

    ReplyDelete
  5. I love this little guy! So darn cute!! Hugs my friend ;o)
    Everytime, I start to feel emotional, I keep looking at your four leaf clover and remember, how lucky I am! I have it on my altar ;o)

    ReplyDelete
  6. This guy is so cute! Thanks for sharing the DIY @DearCreatives Hope to see you again this week. Pinned Theresa

    ReplyDelete
  7. very cute! Thank you for sharing this post at City of Creative Dream's City of Links last Friday! I appreciate you taking the time to party with me. Hope to see you again this week :)

    ReplyDelete
  8. You make the cutest things! Pinned. It is always a pleasure to have you be a part of our party! Please join us tonight at 7 pm. http://loulougirls.blogspot.com
    Happy Monday! Lou Lou Girls

    ReplyDelete
  9. Fun idea. Thanks so much for sharing with Wednesday's Adorned From Above Link Party.
    Debi @ Adorned From Above

    ReplyDelete

Thanks for your lovely comments!