Tuesday, September 20, 2016

Halloween glow in the dark dog bow



Hi there!  I’m over at Bowdabra blog today teaching you how to make an awesome glow in the dark dog bow.  Halloween is on the horizon and you will want to dress up your pet as well as yourself.  You can make this adorable glow in the dark dog bow quick and easy with the Bowabra bow maker with ruler attachment. 

The glow on the bow comes from using glow in the dark duct tape that we made into a kind of ribbon.  This duct tape has a unique fabric like texture that makes it ideal for bow making.  Now when you go out trick or treating with your pooch you will both be a little safer with the blow in the dark dog bow!

The best part is that this dog bow is removable with elastic that easily slides on and off your pet’s collar.

Materials:

Glow in the dark duct tape
Cutting board or any other removable surface
Bowdabra mini bow maker with ruler attachment
Bowdabra bow wire
24” 1 ½” wide orange and black Halloween ribbon
2” 1/8” wide black elastic
Scrap piece of black felt
Hot glue gun and hot glue sticks

Directions:

1.     First make the duct tape ribbon.  Working on a cutting board, cut two pieces of the duct tape 12” long.  Now, carefully stick them sticky sides together.  You will have one piece. 

glow in the dark dog bow

glow in the dark dog bow

glow in the dark dog bow


2.     Next, use a ruler to measure about ¼” wide by 12” long.  Cut two of these strips.  This will be your glow in the dark ribbon.

glow in the dark dog bow

3.     Now to make the bow cut 18” bow Bowdabra bow wire, fold in half and insert into the bow maker.  You will have a loop on one side and two loose wires on the other.  Fold the wires under to keep out of the way while you are making the bow.

glow in the dark dog bow

4.     Then fold the orange and black ribbon in half to find the center.  Insert into the Bowdabra with the wrong side facing up.

glow in the dark dog bow

glow in the dark dog bow


5.     Now bring the right side of the ribbon over and insert the end into the Bowdabra. Then bring the opposite side of the ribbon over the first and under to insert that end into the Bowdabra.  It will look like an X.

glow in the dark dog bow

glow in the dark dog bow

glow in the dark dog bow


6.     Push the first ribbon loop into the Bowdabra.  Then push the second loop into the Bowdabra over the first one. 

glow in the dark dog bow

glow in the dark dog bow

7.     Now take the ¼” strips of duct tape ribbon and fold in half to find the center.  Insert into the Bowdabra. Now make a loop with the right side of the ribbon first.  Then make a matching loop with the other side. 




8.     Repeat step 7 with the second ¼’ duct tape ribbon, so you have two mini bows in the center. Scrunch down with the Bowdabra wand.

glow in the dark dog bow

glow in the dark dog bow

glow in the dark dog bow


9.     Insert the two loose wires through the loop and pull tight while the bow is still in the Bowdabra.  Remove from the Bowdabra, turn to the back, separate the wires and tie a knot.  Then tie a second knot. After you tie the second knot clip the excess wires.

glow in the dark dog bow

glow in the dark dog bow


10. Finish with the elastic attachment.  Cut a piece of black felt ¾” x ¾” and a piece of elastic about 2” long.  (You may need to cut a larger or smaller piece of elastic depending upon how wide your pet’s collar is.

glow in the dark dog bow



11. Finally glue the elastic in a loop on the back of the bow. Cover where it attaches by gluing the felt on that area.  You may slide your bow easily on and off your pet’s collar.  The center bow will glow with a very Halloween-y greenish hue.



glow in the dark dog bow

glow in the dark dog bow

glow in the dark dog bow


1 comment:

Thanks for your lovely comments!